WXS-RAM Wireless outdoor 180-degree PIR with antimasking
- 12m 180 degree wireless outdoor PIR with anti-masking
- 4 PIR providing left/ right double layered detection for pet tolerance
- Selectable low (0.8m-1.2m) or high (2m) mount
- Independent left/ right detection areas and alarm outputs - ideal for CCTV
Residential
Warehouse
Garden
Retail
Commercial
Education
Filters
Filters
Technology
Advanced Features
Communication
Mounting
Intrusion Detection
- up to 12m, 180 degree outdoor PIR with anti-masking
- Dual-technology (4PIR + 2MW), triple layered detection and pet tolerance
- Selectable low (0.8m-1.2m) or high (2m) mount
- Independent left/ right detection areas and alarm outputs - ideal for CCTV
- up to 12m, 180 degree outdoor PIR with anti-masking
- 4 PIR providing left/ right double layered detection for pet tolerance
- Selectable low (0.8m-1.2m) or high (2m) mount
- Independent left/ right detection areas and alarm outputs - ideal for CCTV
- 12m 180 degree wireless outdoor PIR with and antimasking
- Dual-technology (4PIR + 2MW), triple layered detection and pet tolerance
- Selectable low (0.8m-1.2m) or high (2m) mount
- Independent left/ right detection areas and alarm outputs - ideal for CCTV
- 1
Specifications
See details
Details
Product Range
WX Shield Series
Model Code
WXS-RAM
Detection method
Passive infrared
Detection Coverage
Hight mount： 9.0 m (30') 180°wide Low mount： 12.0 m (40') 180°wide
Detectable speed
0.3 to 2.0 m/s (1' to 6'7"/s)
Sensitivity
2.0 °C (3.6°F) at 0.6 m/s Selectable for each side individually
Power input
3 – 9 VDC (Lithium or Alkaline Battery)
Current draw
19 μA stand-by 4 mA max. at 3 VDC
Alarm period
2.0 ±1.0 sec.
Warm-up period
Approx. 60 sec. (LED blinks)
Alarm output (R)
Solid State switch, 10 VDC 0.01 A max. [Individual : Right or General], [N.O. or N.C.] are selectable
Alarm output (L)
Solid State switch, 10 VDC 0.01 A max. [Individual : Left or General], [N.O. or N.C.] are selectable
Trouble output
Solid State switch, 10 VDC 0.01 A max. [N.O. or N.C.] is selectable
Tamper output
Tamper output is shared with trouble output.
LED indicator
RED: 1. Warm-up 2. Alarm 3. Masking detection 4. “High mount” setting (When the tamper switch is activated, LED blinks if it is “High mount” setting.) YELLOW: 1. Warm-up 2. MW detection
Operation temperature
-30℃ to +60℃(-22°F to +140°F)
Relative humidity
95% max.
Installation Method (indoor/outdoor)
Outdoor
Mounting height
Hight mount：2.0 m (6' 7") Low mount： 0.8 to 1.2 m (2' 7" to 4' )
Weight
730 g (25.8 oz.)
Accessories
[1] Connector for POWER and ALARM (R) [2] Connector for ALARM (L) [3] Connector for TROUBLE [4] Velcro tape [5] Area masking plate x 5 [6] Mounting screw (4 x 20 mm) x 2 [7] Lock screw x 1
Security Grade
IP55
