Optex bridge CKB312 picture

Visual Verification Bridge CKB-312, 12-Channel

  • 12 digital input zones supporting up to 12 ONVIF-compliant devices
  • 4 relay outputs
  • SSL encryption and System Health Check
  • Remote talk-down capability
Contact
Where to Buy
Contact
Where to Buy

The 12-Channel Visual Verification Bridge, the CKB-312, is the hardware component, the IP Gateway, of the OPTEX Intelligent Visual Monitoring solution, that provides a visual verification solution for monitoring stations / Alarm Receiving Centres (ARCs), that is hosted in the Cloud. The OPTEX Bridge is an award-winning IP gateway that connects ONVIF cameras to monitored alarm systems (alarm panel, panic button or other alarm systems) and sends a video stream to the Visual Monitoring Portal powered by CHeKT.

How the solution works


When an alarm is activated, it is transmitted simultaneously to the monitoring station via the the monitored system and to the Cloud with the associated video footage via the Bridge. Within seconds, the operator is presented with the pre and post event recording and the live view of the site. Depending on the procedures in place, the operator will action the appropriate response or send the footage to the customer for verification and instructions. The customer will access the footage with a clear action or "disregard" or "response required". All is recorded in an clear audit trail

Optex C He KT schematic bridge 4 12 channel

OPTEX Bridge Datasheet

Optex bridge CKB312 picture

OPTEX Bridge Datasheet

security

Datasheet

CHeKT

Key features of the 12-channel Bridge


The OPTEX 12-channel Bridge, CKB-312, is a very secure IP device that allow to bridge the gap between monitored alarm systems and IP cameras to provide visual verification. Featuring twelve digital inputs and four relay outputs, the CKB-312 is suited for larger sites with multiple devices and can be used for many different applications such as monitoring intrusion and personal attacks to visually verifying when a leak sensor has gone off . The relay outputs can be used to switch lighting on, issue a voice warning via a siren or to trigger the opening of a gate. In some retail applications, customers have connected the Bridge to release a smoke cloak in case of burglary.

The 12-channel OPTEX Bridge:

  • supports 12 ONVIF and RTSP compliant camera and NVR/DVR
  • features 4 relay outputs
  • provides System Health Check, the Bridge and IP cameras connected to it are monitored by the Cloud and will signal any problem.
  • features line level output for remote talk-down capability
  • Is equipped with SSL encryption for secure communication with the Cloud
  • Is programmable via the installer mobile App
This is a unknown image
Stay Connected

Follow OPTEX EMEA Entrance

Follow OPTEX EMEA Security

OPTEX (Europe) Ltd. Copyright © 2024

Terms & ConditionsPrivacy & Cookie Policy